8x2 USB 2.0 Desktop Recording Studio
Don’t sacrifice your desktop or your music.
You care intensely about your music. It’s more than a pastime – it’s a passion. Brilliantly designed, the I-ONIX Desktop Recording Series fits where it makes the most sense, between your keyboard and monitor. With all the level meters and gain controls at your fingertips when using your DAW, you'll wonder why no one ever thought of it before.
Featuring newly designed dbx® 60V high-voltage, ultra-low noise mic preamps on all 8 channels, the I-ONIX U82S is more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D – D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance.
The I-ONIX U82S can record eight tracks at once and includes 8 combi-jack mic/line inputs with +48V phantom power, 2 TRS balanced line outputs, 2 hi-Z instrument inputs, 2 high power 1/4" headphone outputs, S/PDIF and MIDI I/O. Dedicated knobs and meters offer easy access to input and output levels and locking combi-jacks make sure that a connection is not lost in the middle of a performance.
The Pantheon™ II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, and 35 factory presets that range from Vocal to Live Sound and Special Effects. It’s easy to complete your mix and make your music sound its best with exquisitely rich, full reverbs.
No compromise performance – ergonomic brilliance.
Pure genius.
The I-ONIX U82S contains all the necessary tools to transform your computer into a professional 24-bit/96kHz digital recording studio.
- USB 2.0 Desktop Recording Studio
- 44.1kHz to 96kHz sample rates, 24-bit resolution
- Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
- dbx® 60V high-voltage, ultra-low noise microphone preamps on all 8 channels
- Superior sonic performance
- 8 analog combi-jacks for mic/line inputs
- 2 analog 1/4" TRS balanced outputs
- Zero latency monitoring
- Low latency ASIO drivers
- Streamlined monitor form factor puts all recording controls at your fingertips
- Separate level meters and gain control per channel
- 2 side panel 1/4" instrument inputs
- 2 side panel headphone outputs with dedicated volume adjustment
- Stereo S/PDIF digital I/O
- MIDI in and out
Combi-Jack Analog Inputs: 8
Simult. Recording Sources: 10
Microphone Preamps: 8
Hi-Z Instrument Inputs: 2
S/PDIF: Yes
MIDI: Yes
Headphone Connections: 2
1/4" TRS Balanced Analog Outputs: 2
Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3k O balanced
Phantom Power: +48 Volts
Maximum gain: +55 dB
E.I.N. (at max gain): -127 dB @ 55dB gain typical (150O source) -130 dB @ 55dB gain typical A-weighted (150O source)
Maximum Input Level: +8 dBu
Frequency Response: +/-1.5 dB, 20Hz - 20kHz
THD+N: <0.02%, 20Hz - 20kHz, <0.002%, 1kHz, -6 dBu
Line In puts: 1/4” TRS balanced or unbalanced
Input Impedance: 20k O balanced, 13k O unbalanced
Maximum Input Level: +18 dBu
Frequency Response: +/-1.5 dB, 20Hz - 20kHz
THD+N: <0.02%, 20Hz - 20kHz, <0.002%, 1kHz, +18 dBu
Instrument Input: 1/4" TS unbalanced
Input Impedance: 1M O
Maximum Input Level: +10 dBu
Frequency Response: +/-2.5 dB, 20Hz - 20kHz
THD+N: <0.08%, 1kHz, +4 dBu
Line Outputs: 1/4” TRS balanced or unbalanced
Level: +18 dBu maximum
Impedance: 32 O Balanced, 16 O Unbalanced
Headphone Output: 1/4” stereo jack 250mW per channel at 50O
MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out
Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
Dynamic Range: D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
Dynamic Range: A/D/A (24 Bit) 106 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements: Power adaptors available for 100 – 240 VAC, 50/60 Hz, 15 Watts
Lexicon Pantheon II VST/AU Reverb Plug-In
Pantheon II™ makes it easy to complete your mix and make your music sound its best with exquisitely rich, full reverbs. The Pantheon II reverb plug-in continues to be a value added piece of software that gives your recording a legendary sound. It now supports both VST and Audio Unit formats and operates up to 96kHz.
- VST and Audio Units reverb plug-in
- Supports 44.1kHz to 96kHz
- 16 and 24-bit compatible
- 35 factory presets that range from Vocal to Live Sound and Special Effects
- 6 reverb types: Ambience, Chamber, Hall, Room, Plate, Custom
- 16 editable parameters per reverb type
- Full, rich reverb for dimension and depth
- Mono and stereo operation
- Efficient CPU utilization
Pantheon II ships with the I-ONIX U22, U42S, U82S, and FW810S.
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now? Try our on-line chat, or
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
|
PC
|
Mac
|
|
- Microsoft Windows® Vista 32 and XP SP2
- 1.8 GHz CPU or faster
- 1 GB RAM
- Display resolution 1024x768 pixels
- DVD-ROM drive
- USB 2.0
- Internet access required for software license activation
|
- Mac® OS X 10.4.9 or higher
- Intel® Multicore system (Required)
- 1 GB RAM
- Display resolution 1024x768 pixels
- DVD-ROM drive
- USB 2.0
- Internet access required for software license activation
|
Sound Cards
