|
Hybrid
Includes both a Mac and Windows version of the program.
|
HDSP 9652 is the successor of the well-known PCI card Project Hammerfall (DIGI9652). Like the original Hammerfall, HDSP 9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based real-time mixer/router.
The HDSP 9652's Secure BIOS Technology allows you to perform hardware updates via software/driver without any risk. And thanks to its unique 'Zero CPU Load' technology Hammerfall DSP guarantees highest performance and lowest latency!
Hammerfall also supports Expansion Boards (EXB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs, 16 analog outputs, or up to two TDIF ports directly inside the computer.
- 3 x ADAT digital I/O, based on RME's reliable Bitclock PLL
- 1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
- 1 x Breakout cable for coaxial SPDIF operation
- 1 x Word clock I/O (BNC) on included expansion board
- 1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
- 2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable
- HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware
- TotalMix: 1352 channel mixer with 40 bit internal resolution
- S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical
- And numerous other features found already in the Hammerfall series.
The Hammerfall® DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0), Mac OS 9.x (ASIO 2.0) and Mac OS X (Core Audio, Core MIDI).
SETTINGS DIALOG
Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSP 9652 comes up. The clear structured, easy to understand window plus the unique informative status windows for input signal, clock mode, sample rate and time code make your work with Hammerfall DSP to a real pleasure. With a simple mouse click you gain access to the full power of your card.
When working with several digital sources it is not only necessary to know if these are properly locked, but also if they are totally synchronized. RME's exclusive SyncCheck checks all input signals and displays their actual state, and thanks to RME’s Intelligent Clock Control concept you have all clocks and states under control - with ease.
A display of the time code at the ADAT Sync-In port offers a quick check of the communication between external device and Hammerfall.
TECHNICAL SPECIFICATIONS AND FEATURES
- Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable
- 8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms
- ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels!
- All settings changeable in realtime
- Clock modes slave and master
- Automatic and intelligent master/slave clock control
- Enhanced Mixed mode: All inputs and outputs simultaneously operational
- Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
- Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring
- Comes with DIGICheck: the ultimate measurement, analysis and test tool
- Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC)
- Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical
- Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC)
- Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical
UNIQUE TECHNOLOGIES IN HDSP9652
AutoSync:
Intelligent clock control according to operational mode and present/desired sample rate.
Bitclock PLL
Reliable receiver circuit for ADAT optical signal.
Dynamic Bus Utilization
Scalable computer load according to the current usage.
Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.
DIGICheck DSP
Professional status and level display at lowest CPU load.
Intelligent Clock Control
Measurement and display of all incoming and used clocks.
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
Secure BIOS Technology
Automatic BIOS replacement when flash process fails.
SyncAlign®
Surveillance and sample accurate synchronization of all channels.
SyncCheck®
Comparison and display of all input clock status.
TotalMix
Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
Zero Latency Monitoring - ZLM®
Automatic monitoring of the input signal with zero latency
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now?
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
|
PC
|
Mac
|
|
Windows 98/SE/ME/2000/XP
PCI Interface: a free PCI rev. 2.1 Busmaster slot.
|
Mac OS 9.x or X
PCI Interface: a free PCI rev. 2.1 Busmaster slot.
|
